| AZM161SK-12/12RK-024 | SCHMERSAL | Выключатель | Datasheet Инструкция (Скачать PDF) |
- Описание
-
Обзор продукта:
AZM161SK-12/12RK-024 | SCHMERSAL | Выключатель
Технические характеристики и спецификация:
Электромагнитный блокировочный выключатель Schmersal AZM 161 серии, питание для разблокировки, 24 В переменного/постоянного тока, 4NC/2NO
Стандартные защитные выключатели
Производитель: SCHMERSAL .
Каталог: Полный каталог продукции SCHMERSAL .
Сроки поставки: 7-9 недель
Для уточнения точных сроков и цены, свяжитесь с нашими сотрудниками
Артикулы SCHMERSAL по каталогу и аналогом:
AZM161SK-12/12RK-024
General data - Features
Power to unlock Yes
Manual release Yes
Number of actuating directions 3
Number of auxiliary contacts 2
Number of safety contacts 4
Safety classification Standards EN ISO 13849-1
Performance Level, up to c
Category 1
B10D Normally-closed contact (NC) 2,000,000 Operations
Note Electrical life on request.
B10D Normally-open contact (NO) 1,000,000 Operations
Note at 10% Ie and ohmic load
Mission time 20 Year(s)
Safety classification - Fault exclusion Please note: Can be used when fault exclusion for dangerous damage to the 1-channel mechanism is permissible and sufficient protection against manipulation is guaranteed.
Performance Level, up to d
Category 3
Note for 2-channel use and with suitable logic unit.
Mission time 20 Year(s)
Safety classification - Guard locking function
Performance Level, up to e
Note (Performance Level) Information for the safety classification of the guard locking function is documented in the "Operating instructions" or in the "Operation and mounting" instructions.
Mechanical data
Mechanical life, minimum 1,000,000 Operations
Actuating play in direction of actuation 5.5 mm
Holding force FZh in accordance with EN ISO 14119 2,000 N
Holding force Fmax, maximum 2,600 N
Latching force 30 N
Positive break travel 10 mm
Positive break force per NC contact, minimum 10 N
Positive break force, minimum 20 N
Actuating speed, maximum 2 m/s
Mounting Screws
Type of the fixing screws 3x M5
Type of the screw head Flat head screw
Tightening torque of the fastening screws for the housing cover 0.6 Nm
Note The tightening sequence of the cover screws must be observed. This can be found in the attached drawing in the “Pictures” tab.
Mechanical data - Connection technique
Cable entry 4 x M16 x 1,5
Termination Screw terminals
Cable section, minimum 0.25 mm²
Cable section, maximum 1.5 mm²
Note All indications including the conductor ferrules.
Allowed type of cable solid single-wire
solid multi-wire
flexible
Mechanical data - Dimensions
Length of sensor 30 mm
Width of sensor 130 mm
Height of sensor 90 mm
Ambient conditions
Degree of protection IP67
Ambient temperature -30 ... +60 °C
Storage and transport temperature -30 ... +85 °C
Note (Relative humidity) non-condensing
non-icing
Permissible installation altitude above sea level, maximum 2,000 m
Ambient conditions - Insulation values
Rated insulation voltage Ui 250 VAC
Rated impulse withstand voltage Uimp 4 kV
Electrical data
Thermal test current 6 A
Rated control voltage 24 VAC/DC
Required rated short-circuit current 1,000 A
Electrical power consumption, maximum 10 W
Switching element NO contact, NC contact
Switching principle slow action, positive break NC contact
Maximum switching frequency 1,000 /h
Material of the contacts, electrical Silver
Electrical data - Magnet control
Magnet switch-on time 100 %
Test pulse duration, maximum 5 ms
Test pulse interval, minimum 50 ms
Electrical data - Safety contacts
Voltage, Utilisation category AC-15 230 VAC
Current, Utilisation category AC-15 4 A
Voltage, Utilisation category DC-13 24 VDC
Current, Utilisation category DC-13 2.5 A
Electrical data - Auxiliary contacts
Voltage, Utilisation category AC-15 230 VAC
Current, Utilisation category AC-15 4 A
Voltage, Utilisation category DC-13 24 VDC
Current, Utilisation category DC-13 2.5 A
- Аксессуары и аналоги
-
- Отзывы
-
ОтзывыЗарегистрируйтесь, чтобы создать отзыв.
