AE458RFW01A1SZ | Coilcraft | Трансформатор (Код: )

Описание

AE458RFW01A1SZ | Coilcraft | Трансформатор

Производитель: Coilcraft 

Сроки поставки: 4-6 недель

AE458RFW01A1SZ A 1:1 0.400–600 0.40 10 120 10 120 —

AE458RFW01B1SZ B 1:1 0.250–750 0.58 9.5 75 9.5 75 36

AE458RFW02B1SZ B 1:2 0.200–500 0.50 10 120 20 150 8.5

AE458RFW03B1SZ B 1:3 0.300–900 0.60 9.0 100 27 150 8.5

AE458RFW04B1SZ B 1:4 0.250–750 1.0 9.0 55 36 120 30

AE458RFW04B2SZ B 1:4 1.500–1200 2.0 2.0 50 8.0 100 15

AE458RFW04B3SZ B 1:4 0.500–1000 0.90 5.0 80 20 120 10

AE458RFW04B4SZ B 1:4 0.300–700 0.65 9.0 80 36 200 7.5

AE458RFW08B1SZ D 1:8 0.150–600 0.60 22 120 176 310 17

AE458RFW09B1SZ B 1:9 0.300–500 0.54 9.0 80 81 230 5.0

AE458RFW16B1SZ B 1:16 0.600–300 0.80 5.0 80 80 230 5.0

AE458RFW04C1SZ C 1:4 0.250–800 1.0 9.0 60 36 120 30 1.

When ordering, please specify testing code: AE458RFW04C1SZ Screening:

Z = Unscreened

H = Group A screening per Coilcraft CP-SA-10001

2 = EEE-INST-002 level 2

3 = EEE-INST-002 level 3

4 = MIL-STD-981 Class B

5 = MIL-STD-981 Class S

F = Screening per ESCC 3201 All screening performed to the document’s latest revision Custom screening also available Note: Screening T and U have been replaced with more detailed codes 4, 5, and 1, 2, 3, respectively. Codes T and U can still be used, if necessary. Core material Ferrite Terminations Tin-lead (63/37) over silver-platinum-glass frit. Ambient temperature –40°C to +85°C Maximum part temperature +95°C (ambient + temp rise). Storage temperature Component: –55°C to +95°C. Tape and reel packaging: –55°C to +80°C Resistance to soldering heat Max three 40 second reflows at +260°C, parts cooled to room temperature between cycles Moisture Sensitivity Level (MSL) 1 (unlimited floor life at <30°C / 85% relative humidity) Enhanced crush-resistant packaging 750/7″ reel; Plastic tape: 12 mm wide, 0.3 mm thick, 8 mm pocket spacing, 2.9 mm pocket depth ■ Miniature wideband transformer: 4 mm square 3 mm high ■ 300 V interwinding isolation, 1/4 Watt RF input power ■ 250 mA max current rating ■ Passes NASA low outgassing specifications ■ Leach-resistant base metalization with tin-lead (Sn-Pb) terminations ensures the best possible board adhesion. 2. Impedance ratio is for the full primary winding to the full secondary winding. 3. Inductance measured at 100 kHz, 0.1 V, 0 Adc on an Agilent/ HP 4192 or equivalent. 4. DCR measured on a micro-ohmmeter. 5. DC imbalance is the maximum difference in current measured at pins 4 and 6 with the source at pin 5. Inductance drop is 15% at maximum imbalance. 6. Electrical specifications at 25°C. Measurements are referenced to 50 Ohms. Refer to Doc 362 “Soldering Surface Mount Components” before soldering.